JBL Control 30

JBL Control 30
Frequency Range38 Hz – 17 kHz (-10 dB)

Power Capacity 500 W Continuous Program Power; 250 W Continuous Pink Noise

Transformer Taps 70 V: 150 W, 75 W, 38 W, 19 W 100 V: 150 W, 75 W, 38 W 

Thru Position: 4 ohms nominal

Frequency Response 40 Hz – 16 kHz ( ± 3 dB)

Maximum SPL @ 1m Short-Term: 123 dB; Long-Term: 117 dB

Nominal Sensitivity93 dB, 1W @ 1m (3.3 ft)

Nominal Coverage Angle 120° H x 110° V

Directivity Factor (Q) 5.2 dB, averaged 500 Hz to 10 kHz

Directivity Index (DI) 7.1 dB, averaged 500 Hz to 10 kHz

Nominal Impedance 4 ohms

Crossover Network3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF, 3rd order High Pass, HF, plus conjugate shaping circuitry.

Low Frequency 250 mm (10 in) fiberglass/Kevlar® cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet

Mid Frequency125 mm (5 in) anodized aluminum cone with EPDM rubber (Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in) voice coil on fiberglass former

High Frequency 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround

Enclosure MaterialHigh Impact PolyStyrene (HIPS) with 10% glass fill plus patent pending internal 5 mm foamed polyurethane secondary mold

Grille Thermoset composite coated steel, WeatherMax multi-layer foam

Overload ProtectionSonicGuard full range power limiting to protect network and transducers.

EnvironmentalIEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.

TerminationsScrew-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open

Safety Agency RatingTransformer is listed per UL1876

Colors Black or white (-WH)

Dimensions (H x W x D)593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in.)

Net Weight (ea) 18.9 kg (42 lb)

Shipping Weight (ea) 20.3 kg (45 lb)

Included Accessories 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 305 mm InvisiBall Hex wrench.

Optional Accessories MTC-30CM (-WH) to install speaker down from the ceiling. MTC-30UB (-WH) U-Bracket