The Electro-Voice ZX3-60PI is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60PI cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.
This speaker has water-resistant powder coated stainless steel grilles and waterproof glandnut input panels with SJO cable.
2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
High output, 131dB SPL capacity
Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
Rugged, high-tech polypropylene enclosure
3 suspension Anchor Plates, 10 M8 insert suspension points
| Active or Passive | Passive |
| Frequency Response | -10dB:48-20,000Hz |
| Power Capacity | 600W |
| Maximum Sound Pressure Level (SPL) | 131dB |
| Nominal Sensitivity | 97dB |
| Impedance | 8 ohms |
| Crossover | 2KHz |
| Low Frequency Driver | DVX3121, 12" (305mm) Driver |
| High Frequency Driver | ND2, 1" (25.4mm) exit Neodymium |
| Enclosure Material | Polypropylene Structural Foam |
| Input Connections | Glandnut SJO cable |
| Mounting Options | Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
| Dimensions | 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
| Weight | 43.7 lbs (19.8 kg) |
|
| Package Weight | 49.4 lb |
| Box Dimensions (LxWxH) | 26.0 x 17.5 x 15.0" |